Product Showcase
-
90º High Power Hybrids
9/28/2006
Corry Micronics 90º high power hybrids cover a frequency range from 870 MHz to 2,200 MHz. A 90º hybrid has two outputs that maintain the same output level but the signals on the two outputs are 90º apart. On our hybrids there is a fourth termination or isolation port that absorbs half of any reflected signals from any mismatch on either output...
-
Optical Encoders
9/28/2006
Optical Encoders from MicroMo Electronics feature a frequency range up to 300 kHz
-
Dual Isolators And Circulators
9/28/2006
Corry Micronics is committed to providing customizable solutions in every applications possible. As an industry leader, and one of the key suppliers for critical defense and communication applications, Corry Micronics offers a full range of isolators and circulators.
-
Directional Couplers
9/28/2006
Corry Micronics offers four types of 50 ohm directional couplers with several different styles and connector options. All Corry Micronics directional couplers feature a flat frequency response and great port-to-port isolation while maintaining low insertion losses
-
Lumped Element Power Dividers/Combiners
9/26/2006
Corry Micronics’ power dividers and combiners come in several different types and form factors. CMI's standard product line includes 0º, 90º and 180º phase dividers. The power dividers equally divide the signal on to each output line...
-
Power Dividers
9/12/2006
Corry Micronics offers three main types of power dividers. These power dividers are the Wilkinson style, N connector communications power dividers, Broadband and Ultra-Broadband, SMA connector style and the reactive type power dividers...
-
Filtered d-Sub Adapters
9/8/2006
Corry Micronics releases for production filtered d-Sub connector adapters. Ceramic tubular adapters are used in applications requiring high levels of attenuation or where the interfering signals cover a wide range of frequencies...
-
Bolt-In Feedthrus
8/3/2006
These resin sealed bolt-in feedthrus from Corry Micronics are manufactured for installation into a threaded or thru-hole application. Bolt-in filters are installed in amplifiers and RF switches to filter interference coming into and out of the device. Bolt-in filters are a very low cost yet effective filtering solution. Bolt-in feedthrus are available in “C”, “L” and “Pi” circuit configurations. These bolt-in feedthrus are available with capacitance values ranging from 0-5 pF to over 30,000 pF with working voltages exceeding 1,000 VDC. Bolt sizes range from 2-56 to ¼-28 and metric bolt sizes are available upon request. The bolt-in feedthru and lead can be silver, gold or tin plated.
-
InGaAs Linear Photodiode Arrays for 0.9 to 2.2 µm
5/17/2006
Extended InGaAs wavelength sensitivity to 2.2-µm makes these line-scan sensors ideal for thermal machine vision applications or for spectroscopy requiring sensitivity at the 1.95-µm water bands or 1.7-µm C-H bands...
-
SMB Connectors and Cable Assemblies
5/1/2006
SMB connectors are semi-precision, subminiature devices that provide repeatable electrical performance from DC to 4 GHz. The SMB family of connectors provides a means of quick connect and disconnect through a snap-on type coupling