Gigabit Port

Overview
The Gigabit switch series are especially designed to cope with the growing demand for high bandwidth within the workgroup or backbone applications. They provide dedicated bandwidth on each port and accelerate data transmission and segments the network effectively. The series offer flow control function without blocking or head-of-line-blocking problem.

HXR1008SC & HXR1008ST contain 8 100Base-FX ports and 1 SC Gigabit port. Each port can be set at full- or half-duplex mode independently by DIP switches at the front panel, while the Gigabit port is set at full-duplex mode at all time. HSR1008TX includes 8 10/100Base-TX ports and 1 SC Gigabit port. The multi-mode Gigabit port provides wavelength of 850nm for distance up to 500 meters.

Device Drivers Supported
Filename: n/a
Included Drivers: n/a

Technical Specifications

• Model: HSR1008TX / HXR1008SC / HXR1008ST
  
• Standards: 10/100Mbps IEEE 802.3u and 802.3x, 1000Mbps IEEE 802.3z 1000Base-SX/LX
  
• Network Connector: HSR1008TX 8 10/100Base-TX port (RJ-45) with 1 1000Base-SX SC multi-mode port (850nm)
  HXR1008SC 8 100Base-FX port (SC multi-mode Tx/Rx connectors) with 1 1000Base-SX SC multi-mode port (850nm)
  HXR1008ST 8 100Base-FX port (ST multi-mode Tx/Rx connectors) with 1 1000Base-SX SC multi-mode port (850nm)
  
• MAC Address and Self-learning: Up to 12K
  
• Buffer Memory: 3072KB
  
• Flow Control:
  IEEE 802.3x compliant for full-duplex
  Back-pressure flow control for half-duplex
  
• Cable and Maximum Length:
  TP 10/100TX : Category 5 UTP cable up to 100m
  100Mbps Full-duplex Switch via 50/125, 62.5/125, or 100/140µm Fiber Multi-Mode 1300nm: Node to Switch = 2km
  100Mbps Full-duplex Switch via 8.3/125, 8.7/125, 9/125, or 10/125µm Fiber Single-Mode 1300nm: Node to Switch = 20/40/60km

Danpex Corporation, 2114 Ringwood Avenue, San Jose, CA 95131. Tel: 408-434-1688; Fax: 408-434-1699.