Product/Service

FXS1 Fiber Voice Adapter

Source: United Fiber Optic Communication Inc.
The FXS1 is a Fiber Optic Voice Adapter, providing direct, secure fiber optic connection between any telephone set and a PABX.The FXS1 is typically used to extend dial-up phone service to remote sites over a fiber optic.

Features

  • Extend Telephone Link with Fiber
  • Voice Bandwidth from 300Hz to 3.4Khz for toll quality sound
  • Built-in 3 Dry Contact Relay, 2 DCI and Ringer Generation.
  • 12VDC Power Supply
  • 4 Diagnostic LED Indicators

Applications

  • Extend phone line
  • Security
  • Noise and EMI reduction
  • Isolation

Description

  • The FXS1 is a Fiber Optic Voice Adapter, providing direct, secure fiber optic connection between any telephone set and a PABX.The FXS1 is typically used to extend dial-up phone service to remote sites over a fiber optic.
  • FXS1 converts the electrical signals into optical signals. Two in-line units are required to complete a fiber link: a PBX unit (FXO2) for the PBX side and a Subscriber unit (FXS1) for the subscriber telephone set.
  • FXS1 can be operated in two typical configurations:
    Telephone-to-PBX optical connection (Subscriber to PBX). Telephone-to-telephone optical connection (Subscriber to Subscriber).
  • FXS1 is designed to operate with several grades and sizes of fiber optic cable. Use of fiber optic cabling provides immunity to electrical interference such as EMI and RFI.
  • The optical interface is available in single mode (1260 ~ 1360 or 1480 ~ 1580) , with SC connectors.
  • The laser diode has an internal temperature control circuit to compensate for ambient temperature changes.
  • 4 LED status indicators ACT,SYNC,LOS,PWR are available on the front panel of both units for indicating the system status.

United Fiber Optic Communication Inc., 3F, No.100, Sec.2, Roosevelt Road, Taipei, , TW, . Tel: 23696966*6103; Fax: 23685450*6103.