Product/Service

Cable Assembly With Small Form-Factor Connector

Source: Corning Cable Systems
The MT-RJ cable assembly incorporates a small form-factor duplex connector
Corning Cable Systems-RJ cable assembly incorporates a small form-factor duplex connector that doubles the port density that can fit on passive and active hardware. Typical insertion losses are 0.2 dB for multimode fiber and 0.35 dB for singlemode fiber, with a maximum in both cases of less than 0.75 dB. Reflectance is a minimum of -20 dB for multimode fiber, and typically -45 dB for singlemode fiber.

<%=company%>, P.O. Box 489, Hickory, NC 28603-0489. Phone: 800-743-2675, 828-327-5000; Fax: 828-327-5973.