Allied Telesyn Model AT-MC102XL-10

The Allied Telesyn range of Fast Ethernet Media converters provides a complete family of conversion devices, allowing users to extend the size of UTP networks with the use of fiber cabling. Supporting all major fiber connectors, with support for both multi and single mode fiber, these converters can be used to extend networks with up to 15km of fiber.

When connecting media converters to auto-negotiating Fast Ethernet switches, these media converters will automatically connect the link in either Full or Half-Duplex mode, allowing the link to be established with the greatest bandwidth. Alternatively, the "Missing Link" feature allows accurate reporting to network management systems as well as allowing devices with redundant link capability to be inter-connected with these media converters, as a failure in one fiber link will be signalled to the switch, allowing the second link to become active.

All the media converters with a UTP connection feature an internal MDI/MDIX switch, allowing the converter to be connected to either a PC, hub or switch with a simple UTP cable. The media converters also allow the installer to test the integrity of fiber connection, by forcing the converters to communicate over the fiber cable. This ‘Link Test' feature allows installers to check for cable faults without the need for expensive fiber optic test equipment.

Each small media converter is powered by an external power supply unit for use in standalone applications. Where multiple media converters are being used, up to 12 standalone devices can be inserted into a low cost rackmount chassis, allowing all the converters to be powered by a single internal power supply. In critical applications, a second load sharing internal power supply can be installed into the rackmount chassis.

Allied Telesyn Fast Ethernet media converters have a lifetime warranty and free technical support, ensuring trouble-free installation.

• Product Information
  • TX to FX media converter with SC fiber connectors and U.S. power adapter

• Status Indicators
  • Quantity: Four
  • Power: Indicates power is applied to the converter
  • Link (2): Indicates a valid receive link exists
  • Receive (2): Indicates valid data is being received by the converter
  • Normal / Test: Fiber test or normal operation

• Packet Transmission Characteristics
  • Round Trip Delay: 0.4µs Maximum
  • Bit Error Rate (BER): < 10^-12

• Max Cable Distance
  • TX (Category 5): 100M
  • FX Multi Mode: 2000M (full duplex operation)
    412M (half duplex operation)
  • FX Single Mode: 15 km (full duplex operation)
    412M (half duplex operation)

• Optic Interface (Multi Mode)

  Optical:		Typical:		Range:
  Wavelength		1300nm		1200nm to 1300nm
  Sensitivity		-34.5 dBm
  Max. Output Power		-14 dBm
  Transmitter:
  Output Power
  62.5/125mM		-16.8 dBm
  100/140mM
  50/125mM		-20.3 dBm
  85/125mM

• Fiber Optic Interface (Single Mode)

  Optical:	Typical:		Range:
  Wavelength	1300nm		1261nm - 1360nm
  Sensitivity	-31dBm
  Optical Output Power
  	Typical:		Min.	Max.
  	-13.9dBm		-15dBm	-8dBm

• Twisted Pair Interface

  UTP Differential Output Voltage
  	Typical	Min.	Max.
  	980mv	950mv	1050mv
  Overshoot Voltage
  	Typical		Max.
  	4%		5%
  Single Amplitude Symmetry
  	Typical	Min.	Max.
  	1.0062	0.98	1.02
  Rise and Fall Time
  	Typical	Min.	Max.
  Rise	4.6ns	3.0ns	5.0ns
  Fall	4.2ns	3.0ns	5.0ns
  Rise and Fall Time Symmetry
  	Typical		Max.
  	0.4ns		0.5ns

• Physical Characteristics

  Dimensions:	10.5cm x 9.5cm x 2.5cm (4.12 in x 3.75 in x 1.0 in)
  Weight:	294 g (10.4oz)
  Temperature:
  Operating Storage	0° to 50° C -20° to 80° C
  Relative Humidity:	5% to 80% noncondensing
  Electrical / Mechanical Approvals:
  EMC	FCC Class A, IC Class A,
  Safety	UL, CSA, TUV, IEC 825-1,
  	CE compliant

• Power Characteristics

  Input Voltage (Auto Ranging):
  External Power Supply
  Input Supply Voltage		12 VDC +/- 5%
  Max Current		.5
  Power Consumption		6W

NextDay.com, 270 Pulaski Road, Greenlawn, NY 11740. Tel: 877-839-6154.