Products and Services
MCP 12 Mass Connector Polisher
If you're on a budget and need a high quality polisher, the MCP 12 is made for you. The MCP 12 is incredibly easy to use with a very small learning curve so you won't lose valuable production time. With exclusive figure 8 polishing, universal fixture plates, and low consumable costs this machine will quickly become an asset to your company.
Figure 8 Polishing:
The MCP line of polishers are built around a patented design that polishes connectors in a figure 8 pattern. With this feature alone you can achieve a 93% or better first pass yield. The results consistently meet or exceed Bellcore Specs.
This is possible using the figure 8 polishing pattern. The angle of attack on the end face of the connector changes 720 degrees 60 times a second.
With all circular polishers the angle of attack is only changing 420 degrees. This can cause connectors to fall below Bellcore Specs and require a second polishing before passing inspection tests.
Universal Polishing Fixture:
The Universal Polishing Plate is one of the best fixture plates on the market today. With this single fixture alone you can polish FC, SC,ST, ESCON, FDDI, DIN, and most 2.5mm ferrule connectors.
This fixture plate utilizes a Quickload design to make loading connectors into the plate a snap and easy to accomplish.
UNI Fixture Plates also keep your consumable costs down by utilizing the entire surface of the lapping film. With circular polishers up to 40% of the lapping film is wasted.
The UNI Fixture Plates are easy to use and are very low in maintenance. These fixture plates require no calibration and are ready to go out of the box.
Nanometer, 4401 #D El Camino Real, Atascadero, CA 93422. Tel: 805-462-2130; Fax: 805-462-2488.
