| White Paper: Elmination Of Manual Cleaving And De-Nubbing In The Polishing Of Connectorized Fiber End-Faces |
We demonstrate an automated process for connectorized optical fibers encompassing
tip de-nubbing through final polish. The automated process is compatible with both single and
multi-fiber connectors and compliant to applicable optical and end-face geometry criteria. By Krell Technologies, Inc.
|
07/01/2009 |
926.2 KB |
| Datasheet: Network Simulation Unit For Field Applications: Fiber Lab 600 |
The Fiber Lab 600 from M2 Optics provides a portable test facility for anyone working with fiber optic products and systems. Specifically designed as a tabletop unit, it can be easily utilized and moved in a variety of settings with minimal maintenance.
|
06/17/2009 |
663.3 KB |
| Technical Article: Fiber Bragg Grating Dispersion Compensation Enables Cost-Efficient Submarine Optical Transport |
Undersea optical transport is an important part of the infrastructure making up the world-spanning digital transport network. Due to extreme link length and stringent reliability requirements, this important part of the optical backbone poses quite a challenge compared to the more conventional terrestrial systems hence specific technical solutions are required. This article discusses how the unique properties and design possibilities relating to Fiber Bragg Grating (FBG)-based dispersion compensation technology can facilitate desirable cost savings by supporting new terminal designs and link optimized compensations. |
05/11/2009 |
2.31 MB |
| White Paper: Hard Plastic Clad Silica Fibers For Near UV Applications |
Many medical applications have been developed using light sources not only in
the visible and near infra-red (NIR) regions, but also in the near ultraviolet (near UV)
region of the spectrum. Hard Plastic Clad Silica (HPCS) have found much use in medical
applications in general, but generally HPCS fibers are not recommended below 400 nm.
Here we will describe HPCS fibers with excellent mechanical reliability and with optical
losses of only 1.5 dB/m at 275 nm and less than about 0.2 dB/m at 350 nm. How this
combination of properties can benefit diagnostic and surgical applications in the near UV
will also be discussed. By CeramOptec Industries Inc.
|
04/02/2009 |
98.5 KB |
| Datasheet: Vapor Trap |
FTS Vapor traps are mechanically refrigerated
cold traps that protect
expensive vacuum pumps from harmful
vapors which can shorten their life. The
harmful vapors constitute any
condensable gases such as water vapor,
which, when allowed into the vacuum pump
oil, cause it to break down. This results in
decreased lubrication and can eventually
cause failure of the pump. |
02/05/2009 |
83.7 KB |
| Datasheet: Multi-Cool® Bath |
Mechanically Refrigerated Bath by SP Industries, Inc.
|
02/05/2009 |
97.5 KB |
| Product Overview: Value-Added Services |
Corry Micronics recently announced the introduction of its RF housing machining, assembly, and testing services. The turn-key program includes machining and plating the housing, installing the solder-in filters, hermetic seal and environmental testing services, and electrical and mechanical qualification. Product performance testing services, after the filters are installed into the housings, include temperature cycling, gross and fine leak testing, and capacitance and voltage break down testing. |
10/06/2008 |
115.4 KB |
| Research Report: Multiport RF Switch ICs and Modules |
Multiport electrical switch IC/modules using InP HEMTs suitable for high-speed (10 or 40 Gbit/s) and micro-/millimeter-wave applications have been developed. The switches are classified as cold-FET switches, so they are analog switches with almost zero power dissipation. |
09/08/2008 |
891.4 KB |
| Article: Influence Of Concentration And Fill Depth On Product Resistance Of Sucrose During Freeze Drying |
Article: Influence Of Concentration And Fill Depth On Product Resistance Of Sucrose During Freeze Drying |
03/26/2008 |
174.6 KB |
| Product Sheet: Large Capacity Glassware Washers |
Product Sheet: Large Capacity Glassware Washers |
02/25/2008 |
275.2 KB |
| Product Sheet: Large Capacity Glassware Washer Accessories |
Product Sheet: Large Capacity Glassware Washer Accessories |
02/25/2008 |
1.31 MB |
| Datasheet: MS2721B: Spectrum Master - Handheld Spectrum Analyzer |
The MS2721B handheld spectrum analyzer is designed to conduct highly accurate analysis on the new wave of wireless LAN and cellular signals, including 802.11a, 3G, ultra-wideband, WiMAX, and wireless medical patient monitoring systems |
02/11/2008 |
426.1 KB |
| Product Brochure: MS2721B/MS2723B/MS2724B: Spectrum Master - Handheld Spectrum Analyzer |
The Anritsu MS2721B, MS2723B and MS2724B are the most advanced ultra-portable
spectrum analyzers on the market, featuring unparalleled performance and size at
a modest price. |
02/11/2008 |
2.19 MB |
| Datasheet: MS2723B: Spectrum Master - Handheld Spectrum Analyzer |
The MS2723B handheld spectrum analyzer is designed to conduct highly accurate analysis on the new wave of wireless LAN and cellular signals, including 802.11a, 3G, ultra-wideband, and wireless medical patient monitoring systems, dynamic range of 101 dB is the best in its class |
02/11/2008 |
417.0 KB |
| Design Notes: Filtered Military Circular Connectors |
Corry Micronics offers a complete line of Filtered Military Circular Connectors, including MIL-C-38999 Series I, II, and III, MIL-C-26482 Series II, and MIL-C-83723 Series III. Various filtering options are available, including “C”, “C2”, “L”, “J”, and “Pi” circuits, and can include 0.1J or 0.3J Bi-Directional Transient protection. Capacitance values are offered from 47 pF to 10µF depending on circuit type and connector style. These filtered connectors cover a broad band of frequencies, and can be effective up to 20 GHz
|
01/31/2008 |
1.14 MB |
| Product Listing: Filtered Military Circular Connectors |
Corry Micronics offers a complete line of Filtered Military Circular Connectors, including MIL-C-38999 Series I, II, and III, MIL-C-26482 Series II, and MIL-C-83723 Series III. Various filtering options are available, including “C”, “C2”, “L”, “J”, and “Pi” circuits, and can include 0.1J or 0.3J Bi-Directional Transient protection. Capacitance values are offered from 47 pF to 10µF depending on circuit type and connector style. These filtered connectors cover a broad band of frequencies, and can be effective up to 20 GHz. |
01/31/2008 |
2.48 MB |
| Filtering Options and Electrical Characteristics |
Corry Micronics Filtered Military Circular Connectors meet the most stringent military specifications including MIL-C-38999, MIL-C-26482, MIL-C-5015, and MIL-C-83723, and are beneficial in meeting the EMC requirement standards MIL-STD-461, MIL-STD-1275A, MIL-STD704A, and RTCA-DO160D. The filtering elements are completely integrated into the connector body so that the fit, form, and function of the connector application is unchanged. These connectors are ideal for military applications; Land Based, Airborne, and Sea. |
01/31/2008 |
2.82 MB |
| Product Introduction: Filtered Military Circular Connectors |
Corry Micronics offers a complete line of Filtered Military Circular Connectors, including MIL-C-38999 Series I, II, and III, MIL-C-26482 Series II, and MIL-C-83723 Series III. Various filtering options are available, including “C”, “C2”, “L”, “J”, and “Pi” circuits, and can include 0.1J or 0.3J Bi-Directional Transient protection |
01/31/2008 |
1.26 MB |
| White Paper: Why The Need For Preventive Maintenance And Recalibration Of Spectroscopic Analytical Instruments? |
Spectroscopic analytical instruments are complex optoelectronic devices that require careful mechanical, electronic and optical design to assure their long-term service reliability and performance. All of these instruments are constantly experiencing changes in temperature and pressure; undergoing mechanical stress and optical decay, resulting in the gradual degradation of the designed critical performance parameters |
11/21/2007 |
118.3 KB |
| Engineering Note: Spectrometer Signal-To-Noise And Dynamic Range Comparison |
For all Ocean Optics Spectrometers, we specify the Signal-to-Noise (S/N) and the Dynamic Range. These parameters are often used interchangeably. However, it’s important to realize the performance parameters that comprise each measurement |
11/21/2007 |
311.9 KB |
| Engineering Note: HR4000/USB4000 Shutter Mode Performance In Hardware Trigger Mode |
The HR4000 and USB4000 Spectrometers utilize the Toshiba TCD1304 CCD Detector. When operating a USB4000/HR4000 Spectrometer with this detector in External Hardware Trigger mode, you will find some subtle differences between spectra obtained in Normal versus External Hardware Trigger mode |
11/21/2007 |
303.2 KB |
| Engineering Note: PX-2 Pulsed Xenon Lamp Stability |
Several factors determine the effective stability of the PX-2 Pulsed Xenon Lamp (i.e., rep rate, fiber diameter, time frame, wavelength, etc.). This document addresses the more common modes of operation and the resulting stability |
11/21/2007 |
81.0 KB |
| Datasheet: TP-125MK-III Automatic Fiber Optic Cleaner |
Designed especially for use in production facilities, the Model TP-125MK-III automatic fiber optic cleaner, cleans a single fiber end fast, repeatedly and without static residue in less than 3 seconds. What has previously taken minutes for an operator, can now be done in a much shorter period of time |
11/14/2007 |
448.8 KB |
| Datasheet: Acrylate Coated Silica/Silica |
Tapered optical fibers can be made either by fusing a short tapered section onto a longer fixed diameter fiber, or, by very carefully controlling the drawing process to produce a single continuous fiber with an integral tapered section |
10/01/2007 |
668.6 KB |
| Datasheet: Gold And Aluminum Buffered |
Optical fibers are typically manufactured from a preform consisting of a silica core which may be doped silica or pure silica and a cladding classically of silica having a lower refractive index than the core |
10/01/2007 |
673.3 KB |
