| Article: Influence Of Concentration And Fill Depth On Product Resistance Of Sucrose During Freeze Drying |
Article: Influence Of Concentration And Fill Depth On Product Resistance Of Sucrose During Freeze Drying |
03/26/2008 |
174.6 KB |
| Product Sheet: Large Capacity Glassware Washers |
Product Sheet: Large Capacity Glassware Washers |
02/25/2008 |
275.2 KB |
| Product Sheet: Large Capacity Glassware Washer Accessories |
Product Sheet: Large Capacity Glassware Washer Accessories |
02/25/2008 |
1.31 MB |
| Datasheet: MS2723B: Spectrum Master - Handheld Spectrum Analyzer |
The MS2723B handheld spectrum analyzer is designed to conduct highly accurate analysis on the new wave of wireless LAN and cellular signals, including 802.11a, 3G, ultra-wideband, and wireless medical patient monitoring systems, dynamic range of 101 dB is the best in its class |
02/11/2008 |
417.0 KB |
| Product Brochure: MP1026A: Bit Master - Eye Pattern Analyzer |
Anritsu introduces the Bit Master MP1026A Eye Pattern Analyzer that offers eye pattern measurements for data rates from 0.1 to 12.5 Gbps in a handheld, rugged, and battery-powered instrument |
02/11/2008 |
1.57 MB |
| Product Brochure: MS2721B/MS2723B/MS2724B: Spectrum Master - Handheld Spectrum Analyzer |
The Anritsu MS2721B, MS2723B and MS2724B are the most advanced ultra-portable
spectrum analyzers on the market, featuring unparalleled performance and size at
a modest price. |
02/11/2008 |
2.19 MB |
| Datasheet: MS2721B: Spectrum Master - Handheld Spectrum Analyzer |
The MS2721B handheld spectrum analyzer is designed to conduct highly accurate analysis on the new wave of wireless LAN and cellular signals, including 802.11a, 3G, ultra-wideband, WiMAX, and wireless medical patient monitoring systems |
02/11/2008 |
426.1 KB |
| Design Notes: Filtered Military Circular Connectors |
Corry Micronics offers a complete line of Filtered Military Circular Connectors, including MIL-C-38999 Series I, II, and III, MIL-C-26482 Series II, and MIL-C-83723 Series III. Various filtering options are available, including “C”, “C2”, “L”, “J”, and “Pi” circuits, and can include 0.1J or 0.3J Bi-Directional Transient protection. Capacitance values are offered from 47 pF to 10µF depending on circuit type and connector style. These filtered connectors cover a broad band of frequencies, and can be effective up to 20 GHz
|
01/31/2008 |
1.14 MB |
| Filtering Options and Electrical Characteristics |
Corry Micronics Filtered Military Circular Connectors meet the most stringent military specifications including MIL-C-38999, MIL-C-26482, MIL-C-5015, and MIL-C-83723, and are beneficial in meeting the EMC requirement standards MIL-STD-461, MIL-STD-1275A, MIL-STD704A, and RTCA-DO160D. The filtering elements are completely integrated into the connector body so that the fit, form, and function of the connector application is unchanged. These connectors are ideal for military applications; Land Based, Airborne, and Sea. |
01/31/2008 |
2.82 MB |
| Product Listing: Filtered Military Circular Connectors |
Corry Micronics offers a complete line of Filtered Military Circular Connectors, including MIL-C-38999 Series I, II, and III, MIL-C-26482 Series II, and MIL-C-83723 Series III. Various filtering options are available, including “C”, “C2”, “L”, “J”, and “Pi” circuits, and can include 0.1J or 0.3J Bi-Directional Transient protection. Capacitance values are offered from 47 pF to 10µF depending on circuit type and connector style. These filtered connectors cover a broad band of frequencies, and can be effective up to 20 GHz. |
01/31/2008 |
2.48 MB |
| Product Introduction: Filtered Military Circular Connectors |
Corry Micronics offers a complete line of Filtered Military Circular Connectors, including MIL-C-38999 Series I, II, and III, MIL-C-26482 Series II, and MIL-C-83723 Series III. Various filtering options are available, including “C”, “C2”, “L”, “J”, and “Pi” circuits, and can include 0.1J or 0.3J Bi-Directional Transient protection |
01/31/2008 |
1.26 MB |
| White Paper: Why The Need For Preventive Maintenance And Recalibration Of Spectroscopic Analytical Instruments? |
Spectroscopic analytical instruments are complex optoelectronic devices that require careful mechanical, electronic and optical design to assure their long-term service reliability and performance. All of these instruments are constantly experiencing changes in temperature and pressure; undergoing mechanical stress and optical decay, resulting in the gradual degradation of the designed critical performance parameters |
11/21/2007 |
118.3 KB |
| Engineering Note: Spectrometer Signal-To-Noise And Dynamic Range Comparison |
For all Ocean Optics Spectrometers, we specify the Signal-to-Noise (S/N) and the Dynamic Range. These parameters are often used interchangeably. However, it’s important to realize the performance parameters that comprise each measurement |
11/21/2007 |
311.9 KB |
| Engineering Note: HR4000/USB4000 Shutter Mode Performance In Hardware Trigger Mode |
The HR4000 and USB4000 Spectrometers utilize the Toshiba TCD1304 CCD Detector. When operating a USB4000/HR4000 Spectrometer with this detector in External Hardware Trigger mode, you will find some subtle differences between spectra obtained in Normal versus External Hardware Trigger mode |
11/21/2007 |
303.2 KB |
| Engineering Note: PX-2 Pulsed Xenon Lamp Stability |
Several factors determine the effective stability of the PX-2 Pulsed Xenon Lamp (i.e., rep rate, fiber diameter, time frame, wavelength, etc.). This document addresses the more common modes of operation and the resulting stability |
11/21/2007 |
81.0 KB |
| Datasheet: TP-125MK-III Automatic Fiber Optic Cleaner |
Designed especially for use in production facilities, the Model TP-125MK-III automatic fiber optic cleaner, cleans a single fiber end fast, repeatedly and without static residue in less than 3 seconds. What has previously taken minutes for an operator, can now be done in a much shorter period of time |
11/14/2007 |
448.8 KB |
| Datasheet: Acrylate Coated Silica/Silica |
Tapered optical fibers can be made either by fusing a short tapered section onto a longer fixed diameter fiber, or, by very carefully controlling the drawing process to produce a single continuous fiber with an integral tapered section |
10/01/2007 |
668.6 KB |
| Datasheet: Gold And Aluminum Buffered |
Optical fibers are typically manufactured from a preform consisting of a silica core which may be doped silica or pure silica and a cladding classically of silica having a lower refractive index than the core |
10/01/2007 |
673.3 KB |
| Datasheet: Graded Index Silica/Silica |
While graded index silica/silica fibers are available from a number of suppliers with standard polymer coatings, Fiberguide is unique in offering these fibers with high performance buffers/coatings of aluminum, gold and polyimide |
10/01/2007 |
662.7 KB |
| Datasheet: Single Mode Silica/Silica |
While single mode silica/silica fibers are available from a number of suppliers with standard polymer coatings, Fiberguide is unique in offering these fibers with high performance buffers/coatings of aluminum, gold or polyimide |
10/01/2007 |
670.8 KB |
| Datasheet: Solarization Resistant Silica/Silica (Standard OH) |
Long life, deep UV transmission is made possible with Fiberguide’s solarization resistant optical fibers, wherein the fiber core and clad are hydrogen doped at very high temperatures as the fiber exits the draw furnace and then hermetically sealed with an aluminum buffer/jacket during the fiber draw process |
10/01/2007 |
670.5 KB |
| Datasheet: Hard Coated Silica/Silica (Standard OH) |
When looking for a silica core and silica clad fiber with a hard polymer coating that allows a high core-to-clad ratio and a numerical aperture (N.A.) of 0.22 for efficient light coupling, the Superguide SFSH is the fiber of choice |
10/01/2007 |
673.4 KB |
| Datasheet: Plastic Coated Silica/Silica (Low OH) |
When looking for a high quality fiber with superior transmission and a numerical aperture (N.A.) of 0.22 for efficient light coupling, the Anhydroguide AFS is the fiber of choice |
10/01/2007 |
690.2 KB |
| Datasheet: OVA EL<I>p</I> Optical Vector Analyzer |
Luna Technologies' Optical Vector Analyzer (OVA) ELp is used to characterize the polarization and loss properties of fiber optic components for high-speed optical networks. Using an external laser, the OVA ELp is a fast, economical tool that provides industry leading accuracy and resolution in a single sweep of a tunable laser |
09/13/2007 |
715.8 KB |
| White Paper: Optical Vector Network Analyzer For Single Scan Measurements Of Loss, Group Delay And Polarization Mode Dispersion |
The Jones matrix (JM) or linear transfer function (TF) of a fiber-coupled component, when measured as a function of frequency, contains all of the information required to predict final component performance (loss, dispersion, polarization effects, etc.). In this white paper we describe a novel interferometric technique for single-scan, high resolution spectral measurements of the TF of an optical component. In addition, we demonstrate mathematically how the TF is obtained from this measurement apparatus |
08/24/2007 |
170.0 KB |
